Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
- 3. Engines
   3.1. Candles
   3.2. Check of wires
   + 3.3. Ignition system
   - 3.4. Major maintenance of the engine
      3.4.1. Engine electric equipment
      3.4.2. Ignition distributor
      + 3.4.3. Generator
      3.4.4. Battery
      3.4.5. Starter
      3.4.6. Traction relay of a starter
      3.4.7. Sensors
      + 3.4.8. Instructions on service and engine repair
      3.4.9. Compression check in cylinders of engines
      3.4.10. Specifications of engines
      + 3.4.11. Removal and engine installation
      3.4.12. Cover of a head of the block of cylinders
      + 3.4.13. Rollers and yokes
      3.4.14. Thermostat of system of cooling
      3.4.15. Inlet collector
      3.4.16. Final collector
      3.4.17. The incorporated collector (a diesel engine with a turbo-supercharging)
      3.4.18. Turbokompressor
      3.4.19. Turbonagnetatel
      3.4.20. Radiator
      3.4.21. Maslookhladitel
      3.4.22. Fan
      3.4.23. The pump of cooling liquid
      + 3.4.24. Head of cylinders
      3.4.25. Valves and springs
      3.4.26. Saddles
      3.4.27. Replacement of directing plugs
      3.4.28. Hydropushers
      + 3.4.29. Gear belt and covers
      3.4.30. Chain and cover (engine of 2,6 l)
      3.4.31. Oil pallet
      3.4.32. Oil pump and saylent-rollers (vibrogasitel)
      3.4.33. Cam-shafts and support
      3.4.34. Check of a condition of a cam-shaft
      + 3.4.35. Pistons and rods
      3.4.36. Back epiploon
      3.4.37. Radical bearings
      3.4.38. Flywheel
      + 3.4.39. Exhaust system
   + 3.5. Diesel and turbodiesel engines 2,5 and 2,8 of l
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




3.4.7. Sensors

GENERAL INFORMATION

SENSOR OF THE INDEX OF TEMPERATURE OF LIQUID

Sensors of system of cooling on l engines 2,0 and 2,6

1. Thermoswitch
2. The sensor of temperature of liquid for the processor block
3. Sensor of the index of temperature of liquid

Sensors of system of cooling on the engine of 3,0 l (12-klapanny)

1. Fan thermoswitch
2. Conditioner thermoswitch
3. The sensor of temperature of liquid for the processor block
4. Sensor of the index of temperature of liquid

Sensors of system of cooling on the engine of 3,0 l (24-klapanny)

1. Fan thermoswitch
3. The sensor of temperature of liquid for the processor block
4. Sensor of the index of temperature of liquid

Sensors of system of cooling on engines of 3,5 l

1. Fan thermoswitch
2. Conditioner thermoswitch
3. The sensor of temperature of liquid for the processor block
4. Sensor of the index of temperature of liquid

The sensor will screw in an inlet collector, on a diesel engine of 4D55 1983-85 the sensor will screw in a head of cylinders.

Removal and installation

PERFORMANCE ORDER
1. Disconnect weight and merge liquid.
2. Disconnect the socket and turn out the sensor.
3. Establish the sensor in return sequence. The sensor wrap on hermetic.

SENSOR OF PRESSURE OF OIL

It is screwed in the bottom forward part of the block of cylinders, or in the canal of the oil filter vertically, or behind the oil filter horizontally.

The sensor of pressure of oil on l engines 2,0 and 2,6

The sensor of pressure of oil – is specified by an arrow.

The sensor of pressure of oil on a diesel engine

The sensor of pressure of oil – is specified by an arrow.

Removal and installation

PERFORMANCE ORDER
1. Disconnect weight and merge liquid.
2. Disconnect the socket and turn out the sensor.
3. Establish the sensor in return sequence. The sensor wrap on hermetic.