Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
- 3. Engines
   3.1. Candles
   3.2. Check of wires
   - 3.3. Ignition system
      3.3.1. Adjustments
      3.3.2. Check of the sensor of rotation of the crankshaft
      3.3.3. Coil of ignition and additional resistor
      + 3.3.4. Replacement of details of system of ignition
      3.3.5. Ignition installation
      3.3.6. Adjustment of gaps in valves
      3.3.7. Adjustment of turns of idling and quality of a mix
      3.3.8. Adjustment of structure of a mix
   + 3.4. Major maintenance of the engine
   + 3.5. Diesel and turbodiesel engines 2,5 and 2,8 of l
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






3.3. Ignition system
GENERAL INFORMATION

In the majority of updatings of engines ignition system batareyny, contactless.

ENGINES 2,0, 2,4 AND 2,6 L

Numbering of cylinders, the direction of rotation of the roller of the distributor on l engines 2,0 and 2,4

 Operating procedure 1–3–4–2, rotation clockwise.

Arrangement of details of system of ignition on the engine of 2,4 l
1. High-voltage wires of candles
2. Candle
3. High-voltage wire of the coil
 4. Distributor
5. Ignition coil

Numbering of cylinders, the direction of rotation of the roller of the distributor on engines of 2,6 l

 Operating procedure 1–3–4–2, rotation clockwise.

ENGINES 3,0

Engine of 3,0 l (12-klapanny)
Operating procedure 1–2–3–4–5–6, rotation counter-clockwise.

1, 4. High-voltage wires of candles
2. Left head of cylinders
3. Right head of cylinders
 5. The excess is not allowed
6. About 90 °
7. Final collector
9. Back part of the engine
10. Forward part of the engine

Arrangement of details of system of ignition on the engine of 3,0 l (12-klapanny)
1. High-voltage wires of candles
2. Candle
3. High-voltage wire of the coil
 4. Distributor
5. Ignition coil
Engine of 3,0 l (24-klapanny)
The operating procedure 1–2–3–4–5–6, the distributor is absent.

1. High-voltage wires of candles
2. Back part of the engine 		3. Forward part of the engine
4. Top view
5. Front view

Arrangement of details of system of ignition on the engine of 3,0 l (24-klapanny)
1. Power transistor of the block of ignition
2. Ignition coil
3. High-voltage wires of candles
 4. Candle
5. Sensor of rotation of a cam-shaft
6. Sensor of rotation of the crankshaft
Arrangement of details of system of ignition on the valve the engine of 3,0 l

1. Power transistor of the block of ignition
2. Cover
3. High-voltage wires of candles
4. Conducting
 5. Ignition coil
6. Candle
7. Sensor of rotation of a cam-shaft
8. Sensor of rotation of the crankshaft

ENGINE OF 3,5 L

Engine of 3,5 l (dvukhvalny verkhneklapanny)
The operating procedure 1–2–3–4–5–6, the distributor is absent.

1. Rear view
2. Back part of the engine 		3. Forward part of the engine
4. High-voltage wires of candles
5. Top view

On the 24-klapanny engine 3,0 and the engine of 3,5 l the distributor of ignition is absent, impulses in the coil are formed by the processor block in reply to the signals arriving from sensors of rotation of the crankshaft, an angle of rotation of a zaslonka, etc.

The sensor of rotation of the crankshaft on the 24-klapanny engine of 3,0 l is mounted under the crankshaft and closed by a cover of a gear belt.

The rotation sensor on the engine of 3,5 l is mounted under the top cover of a gear belt of the left head of cylinders.