Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
- 3. Engines
   3.1. Candles
   3.2. Check of wires
   - 3.3. Ignition system
      3.3.1. Adjustments
      3.3.2. Check of the sensor of rotation of the crankshaft
      3.3.3. Coil of ignition and additional resistor
      - 3.3.4. Replacement of details of system of ignition
         3.3.4.1. Cover of the distributor and begunok
      3.3.5. Ignition installation
      3.3.6. Adjustment of gaps in valves
      3.3.7. Adjustment of turns of idling and quality of a mix
      3.3.8. Adjustment of structure of a mix
   + 3.4. Major maintenance of the engine
   + 3.5. Diesel and turbodiesel engines 2,5 and 2,8 of l
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes


Мдф 18 мм цена по материалам http://www.spbbastion.ru.


3.3.4. Replacement of details of system of ignition

3.3.4.1. Cover of the distributor and begunok

PERFORMANCE ORDER
1. Uncover, having released latches or having unscrewed screws.
2. Check a cover condition (existence of cracks, traces of breakdown, etc.).
3. Remove a begunok (on a part of cars the begunok fastens the screw) and examine. A worn-out begunok replace (contacts it is forbidden to smooth out).
4. Check a condition of high-voltage wires, if necessary replace, removing and establishing each wire separately.
5. Establish all details upside-down.