Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
- 3. Engines
   3.1. Candles
   3.2. Check of wires
   + 3.3. Ignition system
   - 3.4. Major maintenance of the engine
      3.4.1. Engine electric equipment
      3.4.2. Ignition distributor
      + 3.4.3. Generator
      3.4.4. Battery
      3.4.5. Starter
      3.4.6. Traction relay of a starter
      3.4.7. Sensors
      + 3.4.8. Instructions on service and engine repair
      3.4.9. Compression check in cylinders of engines
      3.4.10. Specifications of engines
      + 3.4.11. Removal and engine installation
      3.4.12. Cover of a head of the block of cylinders
      + 3.4.13. Rollers and yokes
      3.4.14. Thermostat of system of cooling
      3.4.15. Inlet collector
      3.4.16. Final collector
      3.4.17. The incorporated collector (a diesel engine with a turbo-supercharging)
      3.4.18. Turbokompressor
      3.4.19. Turbonagnetatel
      3.4.20. Radiator
      3.4.21. Maslookhladitel
      3.4.22. Fan
      3.4.23. The pump of cooling liquid
      + 3.4.24. Head of cylinders
      3.4.25. Valves and springs
      3.4.26. Saddles
      3.4.27. Replacement of directing plugs
      3.4.28. Hydropushers
      + 3.4.29. Gear belt and covers
      3.4.30. Chain and cover (engine of 2,6 l)
      3.4.31. Oil pallet
      3.4.32. Oil pump and saylent-rollers (vibrogasitel)
      3.4.33. Cam-shafts and support
      3.4.34. Check of a condition of a cam-shaft
      + 3.4.35. Pistons and rods
      3.4.36. Back epiploon
      3.4.37. Radical bearings
      3.4.38. Flywheel
      + 3.4.39. Exhaust system
   + 3.5. Diesel and turbodiesel engines 2,5 and 2,8 of l
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






3.4.17. The incorporated collector (a diesel engine with a turbo-supercharging)

GENERAL INFORMATION

Knot of collectors and engine turbokompressor

1. Pressure head hose
2. Ventilating tube
3. Inlet
4. Inlet collector
5. Air offtake
6. Final collector
7, 11. Guard
8. Turbokompressor
9. Return oil pipeline
12. Final branch pipe
13. Pressure head oil pipeline
14. Drive of a zaslonka of exhaust gases

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect from a turbokompressor an exhaust pipe, remove laying and a guard.
3. Unscrew bolts, remove a branch pipe and a rubber hose.
4. Disconnect a return oil pipeline.
5. Carefully disconnect a pressure head oil pipeline.
6. Disconnect a vacuum hose and remove a drive of a zaslonka of exhaust gases.
7. Unscrew bolts and remove a turbokompressor and laying. Immediately muffle openings and oil channels pure rags. Reliably cover a turbokompressor a dustproof cover.
8. Unscrew bolts and remove at first inlet, then a final collector. Clear the demountable planes.
9. Installation is carried out upside-down. Replace all laying. Tighten all connections with the moments specified an illustrations for a diesel engine. After assembly check pressure of oil and existence of extraneous noise at operation of the engine.