Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
- 12. Body
   12.1. Maintenance and repair
   12.2. Vinyl furnish
   12.3. Upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repair of openings from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. Windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. Cover of a back compartment
   12.16. Bumpers
   12.17. Forward facing lattice
   12.18. External mirrors
   12.19. Forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. Hatch
   12.23. Holder of a spare wheel
   + 12.24. Salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. Ceiling upholstery
   12.28. Switch of the door lock
   - 12.29. Door glass, window regulator and window regulator electric motor
      12.29.1. Cars of 1983-91.
      12.29.2. Cars of 1992-98.
   12.30. Windscreen
   12.31. Back glass
   12.32. Vnutrisalonnoye rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. Electric equipment
+ 14. Electroschemes






12.29.2. Cars of 1992-98.
GENERAL INFORMATION

Glass predny (above) and a back door (1992-98) (on an insert – greasing places)
1. The Tsentalny directing
2. Glass
3. Holder
4. Corner 		5. Sealant
6. A window regulator (at the left – bases of the electric drive, on the right – with the electric drive)

FORWARD DOOR

PERFORMANCE ORDER
1. Remove the internal panel and the water filter.
2. Lower glass and unscrew bolts of fastening of glass.
3. Remove holders from a door.
4. Submit glass a back edge up and get glass.
5. Remove a window regulator.
6. Installation is carried out upside-down.

BACK DOOR

PERFORMANCE ORDER
1. Remove the internal panel and the water filter.
2. Unscrew the top and bottom bolts of fastening central directing and get the directing.
3. Remove holders of glass and get glass.
4. Remove a corner together with a sealant.
5. Disconnect electric drive wires (if it is provided), unscrew bolts and remove a window regulator.
6. Installation is carried out upside-down.