Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
- 12. Body
   12.1. Maintenance and repair
   12.2. Vinyl furnish
   12.3. Upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repair of openings from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. Windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. Cover of a back compartment
   12.16. Bumpers
   12.17. Forward facing lattice
   12.18. External mirrors
   12.19. Forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. Hatch
   12.23. Holder of a spare wheel
   + 12.24. Salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. Ceiling upholstery
   12.28. Switch of the door lock
   + 12.29. Door glass, window regulator and window regulator electric motor
   12.30. Windscreen
   12.31. Back glass
   12.32. Vnutrisalonnoye rear-view mirror
   - 12.33. Seats
      12.33.1. Forward seats
      12.33.2. Back seats and backs of seats
   12.34. Seat belts
+ 13. Electric equipment
+ 14. Electroschemes




12.33. Seats

12.33.1. Forward seats

GENERAL INFORMATION

Forward seat (1992-98)

1. Head restraint

2. A tray (from the passenger, behind an exception "Venov")

3. Covers of eyes of fastening

4. Seat

CARS OF 1992-98.

PERFORMANCE ORDER
1. Get from under seats a tray.
2. Remove slips directing seats. Slips fasten on latches or uvulas.
3. At removal remember an installation site of each slip, consider that the slip is strongly fixed and to remove it it is necessary carefully not to break fastening.
4. Disconnect the battery from weight and sockets of wires of a seat (if seats are equipped with heating). Previously be convinced that wires belong to seat electric equipment.
5. Displace a seat forward and unscrew back bolts of fastening, then unscrew forward bolts, having displaced a seat back.
6. Remove a seat. To assort seats independently it is not recommended.
7. Installation is carried out upside-down.

CARS OF 1983-91.

On these cars the seat fastens to a floor through separate knot of a suspension bracket.

PERFORMANCE ORDER
1. It is recommended to remove at first a seat, and then a framework of a suspension bracket of a seat, having unscrewed 4 bolts.
2. Get from under seats a tray.
3. Remove slips directing seats. Slips fasten on latches or uvulas.
4. At removal remember an installation site of each slip, consider that the slip is strongly fixed and to remove it it is necessary carefully not to break fastening.
5. Disconnect the battery from weight and sockets of wires of a seat (if seats are equipped with heating). Previously be convinced that wires belong to seat electric equipment.
6. Displace a seat forward and unscrew back bolts of fastening, then unscrew forward bolts, having displaced a seat back.
7. Remove a seat. To assort seats independently it is not recommended.
8. To assort a framework or to regulate it it is forbidden.
9. Installation is carried out upside-down.
10. At installation tighten bolts of fastening of a framework of a suspension bracket with the moment of 45 N of m.