Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
- 12. Body
   12.1. Maintenance and repair
   12.2. Vinyl furnish
   12.3. Upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repair of openings from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. Windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. Cover of a back compartment
   12.16. Bumpers
   12.17. Forward facing lattice
   12.18. External mirrors
   12.19. Forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. Hatch
   12.23. Holder of a spare wheel
   + 12.24. Salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. Ceiling upholstery
   12.28. Switch of the door lock
   + 12.29. Door glass, window regulator and window regulator electric motor
   12.30. Windscreen
   12.31. Back glass
   12.32. Vnutrisalonnoye rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. Electric equipment
+ 14. Electroschemes




12.16. Bumpers

GENERAL INFORMATION

Front bumper

1. Towing cross-piece
2. Facing
3. Sensor of temperature of air
4. Bumper

Rear bumper

1. Lamps of a signal of a backing
2. Bumper

Removal and installation

PERFORMANCE ORDER
1. At removal of a front bumper remove the bottom cross-piece for towing, having turned on 4 (or 5) a bolt.
2. Unscrew 5 nuts of fastening of forward facing of a bumper (access to these nuts is provided from the interior of a bumper) and remove facing.
3. On a part of cars remove the sensor of temperature of air.
4. Establish under a prop bumper, unscrew fastening bolts (4 bolts on forward and 8 or 10 bolts on a rear bumper), with the assistant remove a bumper, considering considerable weight of this detail.
5. Installation is carried out upside-down.
6. Tighten fastenings according to the demanded moments.