Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
- 12. Body
   12.1. Maintenance and repair
   12.2. Vinyl furnish
   12.3. Upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repair of openings from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. Windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. Cover of a back compartment
   12.16. Bumpers
   12.17. Forward facing lattice
   12.18. External mirrors
   12.19. Forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. Hatch
   12.23. Holder of a spare wheel
   + 12.24. Salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. Ceiling upholstery
   12.28. Switch of the door lock
   + 12.29. Door glass, window regulator and window regulator electric motor
   12.30. Windscreen
   12.31. Back glass
   12.32. Vnutrisalonnoye rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. Electric equipment
+ 14. Electroschemes

12.19. Forward aerial


Typical arrangement of an antenna cable

1. Box clamp
2. Socket
3. Overlay of a powder
4. Facing bottom боковины salon

Typical fastening of the aerial (1992-98)

1. Gryazeotrazhatel
2. Protective panel
3. Mast
4. Nut of the basis of a mast
5. Basis screw
6. Mast basis

Access to the aerial basis

1. Nut
2. Mast
3. Wing
4. Screen
5. Basis

On cars of 1983-91 for access to the basis of the aerial it is necessary to remove a forward wing.

The real procedure defines a cable replacement procedure assembled with the aerial basis. The mast can be turned out from the screen of the basis and to remove separately.

1. To get a cable of the back aerial, it is necessary to remove floor sections, the right forward and back seats, a slip боковины, an overlay of an average rack, the back bottom panel, a rug and to disconnect a cable from the receiver and the aerial.
2. Get the receiver and disconnect an antenna cable.
3. Wring out clamps and remove a box for trifles, in an aperture of a box disconnect cable latches.
4. Unscrew a nut of the bottom basis of the aerial on a wing, turn out an aerial mast.
5. ZNA cars of 1983-91 remove a forward wing.
6. On cars of 1992-98 remove the protective panel of a wheel niche.
7. Remove the top part of the basis aerials (screen) and carefully stretch a cable through an opening.
8. If the aerial electric drive is provided, disconnect the drive socket.
9. Remove the basis of the aerial and the electric motor (if it is provided).
10. Installation is carried out upside-down.