Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
- 12. Body
   12.1. Maintenance and repair
   12.2. Vinyl furnish
   12.3. Upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repair of openings from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. Windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. Cover of a back compartment
   12.16. Bumpers
   12.17. Forward facing lattice
   12.18. External mirrors
   12.19. Forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. Hatch
   12.23. Holder of a spare wheel
   + 12.24. Salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. Ceiling upholstery
   12.28. Switch of the door lock
   + 12.29. Door glass, window regulator and window regulator electric motor
   12.30. Windscreen
   12.31. Back glass
   12.32. Vnutrisalonnoye rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. Electric equipment
+ 14. Electroschemes

12.6. Repair of openings from a rust or dents

PERFORMANCE ORDER

1. Remove all paint from the damaged surface and from surrounding metal in radius about 2,5 cm, having used an emery paper or the wire brush, put on a drill.

2. If they are inaccessible, this work can be made manually by means of several sheets of an emery paper.

3. Having peeled the paint, you can define extent of corrosion and solve, whether replace the whole panel or if it is possible, to repair the damaged surface. New panels of a body are not too expensive, as many people think, and very often to establish the new panel much quicker, than to repair the big surface damaged by a rust.

4. Remove all parts of decorative furnish from the damaged area, except for what operate as a directing initial form of the damaged body of the car, such as the headlight case, and so on.

5. Having used scissors on metal or a nozhovochny cloth, remove all damaged metal, and also any other metal on which there are rust traces.

6. A hammer bend opening edges inside to create small dredging for a filling material.

7. A wire brush smooth out the damaged surface to remove a poroshkoobrazny rust from a metal surface. If there is an access to a back part of a rusty surface, cover it with anticorrosive paint.

8. Before final seal закупорьте in any way an opening. It can be made by means of a tin, priklepanny or screwed in in an opening, or establish in an opening a wire grid.

9. When the opening will be corked, the damaged area can be filled and painted over (see subsection 12.7).