Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   - 10.2. Forward suspension bracket
      10.2.1. Torsion
      10.2.2. Shock-absorber
      10.2.3. Top spherical support of a suspension bracket
      10.2.4. Bottom spherical support
      10.2.5. Stabilizer of cross-section stability
      10.2.6. Top lever of a suspension bracket
      10.2.7. Bottom lever of a suspension bracket and replacement of plugs
      10.2.8. Rotary fist
      10.2.9. Bearing of a forward wheel
      10.2.10. Corners of installation of wheels
   + 10.3. Back suspension bracket
   + 10.4. Steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






10.2.9. Bearing of a forward wheel

GENERAL INFORMATION

Nave of a forward wheel

1. External bearing
2. Epiploon
3. Internal bearing
4, 5. Holders of bearings
6. Disk томоза
7. Nave

Removal of holders of bearings from a nave

1. External bearing

2. Internal bearing

Press fitting of holders of bearings in a nave

1. External bearing

2. Internal bearing

Removal and installation

PERFORMANCE ORDER
1. Remove a fist.
2. Vypressuyte external bearing.
3. Unscrew bolts of fastening and remove from a nave a brake disk.
4. Beat out a brass opravka from a nave an external holder of the bearing (it it is necessary to do only at bearing replacement, but not at greasing replacement).
5. Vypressuyte internal epiploon.
6. Beat out a holder of the internal bearing.
7. Assembly is carried out upside-down.
8. Fill a nave cavity with greasing.
9. By means of an opravka of suitable diameter press in a nave of a holder of new bearings, it is forbidden to press a holder in blows on its perimeter.
10. Press an epiploon in a nave.
11. Tighten all connections with certain moments.