| 1. Remove back wheels, disconnect a cable of the hand brake. |
| 2. Substitute under the bridge 2 jacks, unscrew a bolt of fastening of a cross-section bar. |
| 3. Disconnect from the bridge shock-absorbers. |
| 4. Lower the bridge and remove springs. |
| 5. Installation is carried out upside-down. |
| 6. Tighten a shock-absorber bolt with the moment of 110-130 N of m (1989-91) or 216–245 N of m (1992-98), a bolt of a cross-section bar – 110–130 N of m (1989-91) or 216–245 N of m (1992-98). |