Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   - 10.2. Forward suspension bracket
      10.2.1. Torsion
      10.2.2. Shock-absorber
      10.2.3. Top spherical support of a suspension bracket
      10.2.4. Bottom spherical support
      10.2.5. Stabilizer of cross-section stability
      10.2.6. Top lever of a suspension bracket
      10.2.7. Bottom lever of a suspension bracket and replacement of plugs
      10.2.8. Rotary fist
      10.2.9. Bearing of a forward wheel
      10.2.10. Corners of installation of wheels
   + 10.3. Back suspension bracket
   + 10.4. Steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




10.2.3. Top spherical support of a suspension bracket

Check, removal and installation

PERFORMANCE ORDER
1. Remove the lever of a suspension bracket and check the moment of resistance a provorachivaniya of a support which should be 0,8–3,5 N of m. Otherwise a support replace.
2. Lift a front of the car and remove a wheel.
3. Remove the top lever of a suspension bracket (see subsection 10.2.6).
4. Remove a cover and remove a lock ring.
5. By means of special equipment выпрессуйте a support from the lever (1 – the lever, 2 – a support).
6. Installation of a support is carried out upside-down.
7. At assembly combine a label on a support (1) with the axial line of the lever (2).
8. Press a support by means of the same equipment.
9. Grease a support and fill a cover with universal konsistentny greasing.
10. A flute of a support grease with hermetic of type 3М ART 8663 and fix a cover a ring.
11. Proshpritsuyte a support through a butterdish.
12. Adjust a road clearance (see subsection 10.2.1) and corners of installation of wheels.