Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   - 10.2. Forward suspension bracket
      10.2.1. Torsion
      10.2.2. Shock-absorber
      10.2.3. Top spherical support of a suspension bracket
      10.2.4. Bottom spherical support
      10.2.5. Stabilizer of cross-section stability
      10.2.6. Top lever of a suspension bracket
      10.2.7. Bottom lever of a suspension bracket and replacement of plugs
      10.2.8. Rotary fist
      10.2.9. Bearing of a forward wheel
      10.2.10. Corners of installation of wheels
   + 10.3. Back suspension bracket
   + 10.4. Steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






10.2.7. Bottom lever of a suspension bracket and replacement of plugs

GENERAL INFORMATION

Bottom lever of a suspension bracket
1. Shock-absorber
2, 12. Lever торсиона
3. Torsion
4. Stabilizer bar
5. Buffer
7. Шплинт
8. Shizhny spherical support
11. Lever axis
13. Bottom lever

Removal and installation

PERFORMANCE ORDER
1. Lift a car front, remove a wheel and a gryazeotrazhatel.
2. Remove торсион assembled with the lever (see subsection 10.2.1).
3. Disconnect from the lever the shock-absorber and a stabilizer bar.
4. Rasshplintuyte nut and выпрессуйте bottom spherical support stripper Mv990809-01 or equivalent.
5. Unscrew bolts of an axis and remove the lever.

Replacement procedure of plugs

PERFORMANCE ORDER
1. The Mv990958-01 adaptation выпрессуйте plugs (at the left) from a frame arm also press new (on the right). At removal of the left plug remove a reducer of a forward axis.
2. The Mv990883-01 adaptation выпрессуйте plugs from the suspension bracket lever.
3. Moisten with soap solution the new plug and press. The plug should act equally from both parties.
4. Further establish the lever upside-down. A nut of a spherical support tighten with the moment of 120-180 N of m.
5. All connections tighten with certain moments.