Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   - 10.2. Forward suspension bracket
      10.2.1. Torsion
      10.2.2. Shock-absorber
      10.2.3. Top spherical support of a suspension bracket
      10.2.4. Bottom spherical support
      10.2.5. Stabilizer of cross-section stability
      10.2.6. Top lever of a suspension bracket
      10.2.7. Bottom lever of a suspension bracket and replacement of plugs
      10.2.8. Rotary fist
      10.2.9. Bearing of a forward wheel
      10.2.10. Corners of installation of wheels
   + 10.3. Back suspension bracket
   + 10.4. Steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes На a570P-01.

10.2.6. Top lever of a suspension bracket

Removal and installation

1. Lift a car front, remove a wheel, the panel of protection was covered also by a gryazeotrazhatel.
2. Remove the shock-absorber.
3. Will hang out the bottom lever a jack and unload торсион, having unscrewed an adjusting nut of a bolt of the lever торсиона.
4. Disconnect a brake hose, release a hose from an arm on the top lever.
5. Remove an arm of the buffer and an arm of a hose of a brake.
6. Rasshplintuyte nut and выпрессуйте top spherical support stripper Mv990809-01 or equivalent.
7. Vypressuyte finger of steering draft.
8. Unscrew nuts and bolts of an axis of the lever, remove adjusting washers and remove the lever.
9. Installation is carried out upside-down taking into account the following.
10. Establish adjusting washers in a former order, tighten nuts of an axis of the lever at first with the moment of 54 N of m, after car lowering – with the moment of 100-120 N of m.
11. A nut of steering draft tighten with the moment of 60-90 N of m, bolts of the buffer of an ogarnichitel – with the moment of 9-14 N of m.
12. Adjust торсион (see subsection 10.2.1), pump over brakes.