Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
- 9. Running gear
   + 9.1. Mechanical transmission
   + 9.2. Coupling
   - 9.3. Automatic transmission
      9.3.1. Adjustments
      + 9.3.2. The blocking switch
      9.3.3. Check of adjustment of a cable of management by transmission
      9.3.4. Mechanism of management of transmission
      9.3.5. Epiploon of a shaft of a case of transmission
      9.3.6. Removal and transmission installation
      9.3.7. Transfer case
      9.3.8. Forward and back epiploons
      + 9.3.9. Forward driveshaft and crosspieces
      + 9.3.10. Back driveshaft and crosspieces
      9.3.11. Forward leading axis
      9.3.12. A nave with a manual unblocking
      9.3.13. A nave with an automatic unblocking
      9.3.14. Forward semi-axes and epiploons of a forward axis
      9.3.15. Reducer of a forward axis
      9.3.16. Dismantling of CV JOINTS
   + 9.4. Zadny Bridge
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




9.3.7. Transfer case

GENERAL INFORMATION

Transfer case

1. Stopper of a refueling opening
2. Drain stopper
3. Cap of the mechanism of a clamp
4. Laying
5. Spring
6. Plunzher
7. Podpruzhinenny pin
8, 9. Wire clamp
10. Polzun
11. Case
12. Laying
13, 16. Cap
14. Spring
15. Ball
17. Spring
18, 19. Plunzher

The transfer case on considered cars transfers a torque to forward wheels. The type of the transfer case established on all cars (with manual and automatic transmissions) 1983-98, is identical. Teeths of gear wheels of a box in continuous gearing, transfer number in position of the HIGH lever – 1,00:1, in the situation LOW (demultiplikatsiya) – 1,94:1. The box is switched by the floor lever through ползун which fastens a pin on a management shaft.