Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
- 9. Running gear
   + 9.1. Mechanical transmission
   + 9.2. Coupling
   - 9.3. Automatic transmission
      9.3.1. Adjustments
      + 9.3.2. The blocking switch
      9.3.3. Check of adjustment of a cable of management by transmission
      9.3.4. Mechanism of management of transmission
      9.3.5. Epiploon of a shaft of a case of transmission
      9.3.6. Removal and transmission installation
      9.3.7. Transfer case
      9.3.8. Forward and back epiploons
      + 9.3.9. Forward driveshaft and crosspieces
      + 9.3.10. Back driveshaft and crosspieces
      9.3.11. Forward leading axis
      9.3.12. A nave with a manual unblocking
      9.3.13. A nave with an automatic unblocking
      9.3.14. Forward semi-axes and epiploons of a forward axis
      9.3.15. Reducer of a forward axis
      9.3.16. Dismantling of CV JOINTS
   + 9.4. Zadny Bridge
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




9.3.12. A nave with a manual unblocking

GENERAL INFORMATION

Nave of a forward wheel with manual blocking

1. Cap
2. Laying
3. Stoporonoye ring
4. Washer
5. Forward brake
6. Blocking mechanism
7. Washer
8. Lock-nut
9. Nave

The device of a spupitsa with manual blocking and its inclusion switching off

1. Handle

2. Lead

3. Coupling

4. Semi-axis

5. Leading gear wheel of a semi-axis

6. Spring

Details of the mechanism of blocking of a nave

1. Cap
2. Laying
3. Coupling
4. Spring
5. Lead
6. Spring
7. Case
8, 10. Lock ring
9. Leading gear wheel
11. Ring gear wheel
12. Remote laying

Blocking of a nave is provided with handle switching in the situation LOCK that involves moving of the shlitsevy coupling. In the situation FREE the coupling descends with шлицов naves and a wheel rotates freely.

Dismantling and assembly

CARS OF 1983-88.

PERFORMANCE ORDER
1. Lift a front of the car and remove wheels.
2. Switch the handle in the situation FREE and unscrew 6 bolts of fastening of a cap of a nave.
3. Remove a lock ring and remove washers.
4. Unscrew 2 bolts and remove a forward brake, take aside and fix.
5. Unscrew 6 bolts of fastening and remove a nave.
6. Remove the coupling, a spiral spring, a freshet ring and a spring ring.
7. With the flat tool remove a lock ring in a back part of the case of a nave and get a conducted part of a nave.
8. Remove a lock ring and remove a conducted ring gear wheel, remote laying and a leading gear wheel of a nave.
9. Assembly is carried out upside-down.
10. Grease ring, leading and conducted gear wheels of a nave with SAE J310А or NLGI N3 greasing.
11. At installation of a collected nave grease places of contact of the case of gear wheels and a nave with hermetic 3M ART N 8661 or N 8663 or equivalent (places of greasing are specified by shading).
12. Tighten nave bolts with the moment of 50-60 N of m, a cap – 10–14 N of m.