Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
- 9. Running gear
   + 9.1. Mechanical transmission
   - 9.2. Coupling
      9.2.1. Coupling adjustment
      9.2.2. Coupling pedal
      9.2.3. Details of a hummock drive of switching off of coupling
      9.2.4. Coupling with a hydraulic actuator
      9.2.5. Removal and coupling installation
      9.2.6. Main cylinder of coupling
      9.2.7. Working cylinder of switching off of coupling
      9.2.8. Air removal from a coupling hydraulic actuator
   + 9.3. Automatic transmission
   + 9.4. Zadny Bridge
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






9.2. Coupling

9.2.1. Coupling adjustment

GENERAL INFORMATION

All considered cars after 1989 of release are equipped with a coupling hydraulic actuator.

Order of adjustment of height and free wheeling of a pedal of coupling (see subsection 9.1.2).

Adjustment of a free wheeling of a pedal with a hummock drive of coupling (till 1989)

PERFORMANCE ORDER
1. Check a free wheeling of a pedal which should be 20–30 mm.
2. If necessary adjust, rotating a nut of a cover of a cable so that a gap between an end face of the plug and a nut there were 2,5 mm.
3. Again check a free wheeling.