Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
- 9. Running gear
   + 9.1. Mechanical transmission
   - 9.2. Coupling
      9.2.1. Coupling adjustment
      9.2.2. Coupling pedal
      9.2.3. Details of a hummock drive of switching off of coupling
      9.2.4. Coupling with a hydraulic actuator
      9.2.5. Removal and coupling installation
      9.2.6. Main cylinder of coupling
      9.2.7. Working cylinder of switching off of coupling
      9.2.8. Air removal from a coupling hydraulic actuator
   + 9.3. Automatic transmission
   + 9.4. Zadny Bridge
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






9.2.5. Removal and coupling installation
GENERAL INFORMATION

Coupling installation on an opravka

 1. Flywheel

2. Frictional disk

3. To grease

4. Opravka

5. Casing

PERFORMANCE ORDER
1. Remove a check point.
2. Establish aligning opravka (for example an old primary shaft of a check point), evenly unscrew bolts and remove coupling disks.
3. Remove vyzhimny the bearing and a fork of switching off of coupling (see subsection 9.2.4).
4. Establish coupling upside-down, having cleared a flywheel and coupling disks.
5. A frictional disk establish on an opravka.
6. Tighten bolts of fastening of coupling to a flywheel with the moment of 18 N of m (1983-89) or 19 N of m (1990-98).
7. On cars of 1992-98 grease shlitsa of a frictional disk and primary shaft with greasing with number according to the Mitsubishi 0101011 catalog.