Mitsubishi Pajero
1982-1998 of release
Repair and car operation
Mitsubisi Padzhero
+
1.1. Dashboard and control units
+
2. Maintenance
+
3. Engines
+
4. Cooling system
+
5. Greasing system
+
6. Power supply system
+
7. Release system
+
8. Fuel system
+
9. Running gear
+
10. Suspension bracket and steering
-
11. Brake system
11.1. Technical characteristics
11.2. Vacuum amplifier of brakes
11.3. Adjustment of brakes
11.4. Switch of a signal of braking
11.5. Removal and pedal installation
11.6. Main cylinder of brakes
11.7. The dosing-out valve
11.8. Regulator of pressure of back brakes (1992-98)
11.9. Control valve of the amplifier of brakes
11.10. Hoses and tubes
11.11. Air removal from a hydraulic actuator of brakes
+
11.12. Forward disk brakes
-
11.13. Back drum-type brakes
11.13.1. Brake drums
11.13.2. Replacement of blocks
11.13.3. Wheel cylinder of back brakes
11.13.4. Board of a back drum-type brake
+
11.14. Back disk brakes (1992-98)
+
11.15. Hand brake
11.16. Anti-blocking system (ABS)
11.17. Hydromodule
11.18. Overload sensor
11.19. Sensor of speed
+
12. Body
+
13. Electric equipment
+
14. Electroschemes
11.13.4. Board of a back drum-type brake
Removal and installation
PERFORMANCE ORDER
1.
Remove drums, blocks, the wheel cylinder (see
subsection 11.13
,
subsection 11.13.2
,
subsection 11.13.3
) and a semi-axis (see
subsection 9.4.1
).
2.
Unscrew 4 bolts and remove a brake board.
3.
At assembly tighten bolts of fastening of a board with the moment of 50-60 N of m.