Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   + 10.2. Forward suspension bracket
   + 10.3. Back suspension bracket
   - 10.4. Steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. Ignition lock
      10.4.4. Lock of blocking of a wheel
      10.4.5. Steering column
      10.4.6. Steering drafts
      10.4.7. Pendular lever
      10.4.8. Average steering draft
      10.4.9. Lateral steering drafts
      10.4.10. Steering mechanism
      10.4.11. Pump of the hydraulic booster
      10.4.12. Air removal from the power steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




10.4.9. Lateral steering drafts

GENERAL INFORMATION

Distance between centers drafts at assembly (1983-91)

1. From average draft

2. From a fist

Distance between centers drafts at assembly (1992-98)

1. From average draft

2. From a fist

Removal and installation

PERFORMANCE ORDER
1. Lift a front of the car and remove wheels.
2. Rasshplintuyte also unscrew koronchaty nuts of fingers of tips and выпрессуйте fingers by means of a bifurcate maple stripper from a fist (at the left) and a screw stripper from average draft (on the right).
3. Turn out external tips, having released collars and having counted number of strings of a carving to a full otvorachivaniye (the distance between centers tips of drafts should be 277–279 mm).
4. Establish drafts upside-down.
5. Tighten nuts of tips of drafts with certain moments. Replace the details specified by a letter of N.