Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   + 10.2. Forward suspension bracket
   + 10.3. Back suspension bracket
   - 10.4. Steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. Ignition lock
      10.4.4. Lock of blocking of a wheel
      10.4.5. Steering column
      10.4.6. Steering drafts
      10.4.7. Pendular lever
      10.4.8. Average steering draft
      10.4.9. Lateral steering drafts
      10.4.10. Steering mechanism
      10.4.11. Pump of the hydraulic booster
      10.4.12. Air removal from the power steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




10.4.7. Pendular lever

Removal and installation

PERFORMANCE ORDER
1. Lift a front of the car and remove wheels.
2. Rasshplintuyte also unscrew a koronchaty nut of a finger, by means of a stripper выпрессуйте a finger of the pendular lever from the central draft.
3. Unscrew a koronchaty nut of the pendular lever and remove the lever (or unscrew bolts and remove the lever with an arm), having paid attention not an arrangement of washers and plugs.
4. Establish the lever upside-down.
5. Put in a cover SAE J310 greasing, edges of a cover grease with hermetic.
6. Tighten nuts with certain moments.