Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   + 10.2. Forward suspension bracket
   + 10.3. Back suspension bracket
   - 10.4. Steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. Ignition lock
      10.4.4. Lock of blocking of a wheel
      10.4.5. Steering column
      10.4.6. Steering drafts
      10.4.7. Pendular lever
      10.4.8. Average steering draft
      10.4.9. Lateral steering drafts
      10.4.10. Steering mechanism
      10.4.11. Pump of the hydraulic booster
      10.4.12. Air removal from the power steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




10.4.10. Steering mechanism

GENERAL INFORMATION

Steering mechanism

1. Cover
2. Bolt
3, 4. Hose
5. Шплинт
6. Nut
7. Average draft
8. Samopodzhimnye of a nut
9. Steering mechanism

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift a front of the car and remove wheels.
3. Remove a cover, unscrew a lock bolt and a bolt of a collar of a shaft of a wheel.
4. Remove a soshka (see subsection 10.4.6).
5. Disconnect and muffle power steering tubes.
6. Unscrew nuts and remove the steering mechanism.
7. Installation is carried out upside-down.
8. Tighten all connections with certain moments.
9. Remove air from a wheel hydraulic actuator (see subsection 10.4.12).