Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   + 10.2. Forward suspension bracket
   + 10.3. Back suspension bracket
   - 10.4. Steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. Ignition lock
      10.4.4. Lock of blocking of a wheel
      10.4.5. Steering column
      10.4.6. Steering drafts
      10.4.7. Pendular lever
      10.4.8. Average steering draft
      10.4.9. Lateral steering drafts
      10.4.10. Steering mechanism
      10.4.11. Pump of the hydraulic booster
      10.4.12. Air removal from the power steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes


покер анализатор
Автокран аренда 16 тонн.


10.4.6. Steering drafts

GENERAL INFORMATION

Steering drafts and moments of an inhaling of connections (1983-91)

1, 4. Шплинт
2, 5. Koronchaty nut
3. Tips of drafts
6. Average draft
7, 13. Samopodzhimnye of a nut
8. Fastening hairpin
pendular lever
9, 12. Covers
10. Nuts
11. Coupling
14. Washer
15. Pendular lever
16. Plug
N–to replace at assembly

Steering drafts and moments of an inhaling of connections (1992-98)

N–to replace at assembly
1, 4. Шплинт
2, 5. Koronchaty nut
3. Tips of drafts
6. Sryaedny draft
7, 13. Samopodzhimnye of a nut
8. Hairpin and arm of fastening of the pendular lever
9, 12. Covers
10. Nuts
11. Coupling
14. Washer
15. Pendular lever
16. Plug
A.Smazat ZM ATD 8663 hermetic
or equivalent

Removal and installation

SOSHKA

Removal of a soshka is facilitated on the removed steering reducer.

PERFORMANCE ORDER
1. Lift a front of the car and remove a wheel.
2. Rasshplintuyte also unscrew a koronchaty nut of a finger, by means of a stripper выпрессуйте a soshka finger from the central draft (it is forbidden to use a wedge-shaped shock stripper).
3. Unscrew a koronchaty nut of a shaft of a soshka and press a soshka stripper Mv990809-01.
4. Establish a soshka upside-down.
5. Combine labels on a shaft and on a soshka.
6. Tighten a soshka nut with the moment of 140 N of m.
7. Replace a cover of draft and шплинт, tighten a finger nut with the moment of 40 N of m.