Lever of inclusion of screen wipers
|
1. ON – normal work of a screen wiper
2. OFF – is switched off
3. INT – faltering work of a screen wiper
4. Handle |
Turn the handle on the lever to include a screen wiper of back glass.
Prevention
Before muffling the engine, always switch off screen wipers and wait, while they will return to a starting position, especially at cold weather. If screen wipers not to return to parking situation, and to leave on glass in case they freeze to a windshield, the engine of screen wipers can be damaged at its following start.
Before inclusion of screen wipers in cold weather check, that they did not freeze to a windshield. If to include screen wipers in such conditions, the engine of screen wipers can fuse.
Do not include screen wipers, when glass dry: they can scratch glass. It also can result in premature wear of brushes.
Replace brushes of screen wipers when they will wear out in order that visibility of the road to rainy weather did not decrease. Use brushes of the suitable size. If you have questions, address to experts.
If in operating time the screen wiper is stopped by any obstacle, such, as ice or snow, the engine of a screen wiper can burn down even if to return the handle of inclusion of a screen wiper to the situation OFF. If it happens, stop the car and switch off ignition, then clear back glass in order that the screen wiper could work normally.
|