Cars without a screen wiper of back glass
Lever of inclusion of screen wipers
|
|
OFF – screen wipers are switched off
INT – faltering work of screen wipers
1–slow work of screen wipers
2–fast work of screen wipers. |
|
|
1. Quickly
2. Slowly
3. Adjusting handle |
Screen wipers of a windscreen can be included by means of the lever of inclusion of screen wipers when the key in the lock of ignition is in the situation ON or ASS.
Cars with a screen wiper of back glass
Lever of inclusion of screen wipers
|
|
OFF – screen wipers are switched off
INT – faltering work of screen wipers
1–slow work of screen wipers
2–fast work of screen wipers. |
|
|
1. Quickly
2. Slowly
3. Adjusting handle |
On cars with system of adjustment of faltering movement of screen wipers the interval of their work can be changed from 2 to 15 with, rotating the adjusting handle.
Turn the handle on itself to increase work intervals.
Clear brushes of screen wipers and car glass soft detergent to remove an oil film from glass and to provide good work of screen wipers, without a scratch and breakthroughs.
Prevention
Before muffling the engine, always switch off screen wipers and wait, while they will return to a starting position, especially at cold weather. If screen wipers not to return to parking situation, and to leave on glass in case they freeze to a windshield, the engine of screen wipers can be damaged at its following start.
Before inclusion of screen wipers in cold weather check, that they did not freeze to a windshield. If to include screen wipers in such conditions, the engine of screen wipers can fuse.
Do not include screen wipers, when glass dry: they can scratch glass. It also can result in premature wear of brushes.
Replace brushes of screen wipers when they will wear out in order that visibility of the road to rainy weather did not decrease. Use brushes of the suitable size. If you have questions, address to experts.
|