Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
- 1.1. Dashboard and control units
   1.2. Internal furnish
   + 1.3. Door locks
   1.4. Bulk mouth of a fuel tank
   1.5. Cowl
   + 1.6. Windows
   + 1.7. Hatch
   + 1.8. Seats and seat belts
   + 1.9. Safety airbag
   + 1.10. Devices and governing bodies
   + 1.11. Start of the engine and driving
   + 1.12. Ignition lock
   1.13. Anticreeping system
   1.14. Lock of a steering column
   1.15. Engine start in cold weather
   + 1.16. Automatic transmission
   + 1.17. Mechanical transmission
   1.18. Parking brake
   1.19. Brake pedal
   1.20. System of the hydraulic booster of brakes
   1.21. The sound signal warning about wear of brake shoes
   1.22. System of anti-blocking of brakes
   1.23. Lever of adjustment of height of a steering column
   1.24. Steering system with hydraulic strengthening
   1.25. Rear-view mirrors
   1.26. Heaters of rear-view mirrors
   1.27. System cruise control
   1.28. Adjustment of volume and air direction
   1.29. Heater / conditioner
   1.30. Conditioner switch
   1.31. Salon heating
   1.32. Heating of a windscreen and glasses of doors
   - 1.33. In case of an emergency
      1.33.1. An arrangement of a spare wheel, a jack and tools in the car
      1.33.2. Poddomkrachivaniye of the car
      1.33.3. Car lowering
      1.33.4. Wheel replacement
      1.33.5. Car towage
   1.34. Replacement of lamps
   1.35. Capacity of lamps
   + 1.36. Headlights of head light
   1.37. Lamps of illumination of back registration plate
   1.38. Lamp of illumination of a luggage carrier
   1.39. Lamps for reading cards
   1.40. Top plafond
   1.41. Top lamp of a stoplight
   1.42. Portable lamp
   1.43. Safety locks
   + 1.44. Identification numbers and information plates
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




1.33. In case of an emergency

1.33.1. An arrangement of a spare wheel, a jack and tools in the car

GENERAL INFORMATION

Arrangement of a spare wheel, jack and tools in the car

1. Spare wheel

2. Office for tools

3. Jack

4. Jack handle

The jack and the handle of a jack are stored in office for tools under a back seat.

Tools are stored in office for tools on outer side of a back door.

Jack

1. Fixing nut

Open a cover. Turn off a fixing nut and get a jack.

Jack handle

Get the jack handle from a clip and get it from office for tools.

1. Holder

Having pressed a springing ring, get the handle.

Having pressed on a springing ring, collect the handle.

Tools

1. Office for tools
2. Flat-nose pliers
3. A key of the top hatch (for cars with the top hatch)
4. Screw-driver
5. Gaykovert
6. Lomik
7. Small lamp
8. A key for removal of the cap closing nuts of fastening of a wheel
9. Wrench (big)
10. Wrench (small)

Spare wheel

1. Lomik

2. Gaykovert

The spare wheel is established on вня to the shny party of a back door.

In some models, for the theft prevention, one of bolts of fastening of wheels has the small lock.

 

To remove the lock, insert a key into a crack of the lock and remove it from a bolt.

Turn off bolts of fastening of a spare wheel with the help гайковерта.

Insert ломик into openings гайковерта when untwisting bolts of fastening of a wheel. Remove a spare wheel

When on a hook (1) there is no spare wheel, pull out a hook and lift it up in a special opening for its storage.

For installation of the removed wheel. Lower a hook of fastening of a spare wheel and establish on it the removed wheel. Combine openings for bolts in a wheel with openings on a fixing arm and insert bolts of fastening of a spare wheel.


Prevention

Before installation of a wheel of the car on a fixing arm of a spare wheel, check, that the hook of fastening of a spare wheel was lowered.


With the help гайковерта tighten bolts of fastening of a wheel. For lock installation on one of bolts, put the lock with the inserted key on a bolt head as it is possible further. Then, close the lock, having got from it a key.

Prevention

The spare wheel should be reliably fixed at car movement. At installation of a spare wheel instead of the lowered wheel, establish the lowered wheel on an arm of fastening of a spare wheel and reliably twirl fixing nuts.


Poddomkrachivaniye and wheel replacement

Points of installation of a jack

And. Forward point of installation of a jack

If car lifting at jack installation in a point And insufficiently, use a point of Century.

Page. Back point of installation of a jack

Before car installation on a jack, put the car on the parking brake. On cars with a mechanical transmission transfer the gear shifting lever to the provision of neutral transfer. On cars with an automatic transmission include parking transfer of R and turn a key in the ignition lock in the situation LOCK.

Establish a jack under one of points for installation of the jack, shown in drawing. Use a point of installation of the jack, the next to a replaced wheel, or to a wheel on which it is necessary to establish chains for improvement of coupling with the road.

Prevention

Check, that the jack was established on a dense surface.