Button of inclusion of a heater
The heater of back glass can be included at the working engine.
The alarm lamp will light up after pressing the button of inclusion of a heater. The current will begin to flow through heating elements on back glass, heating up it in order that сконденсировавшаяся on glass moisture quicker evaporated or hoarfrost thawed.
Approximately after 11 mines of work the system will automatically be switched off.
To switch off a heater before the expiration of 11 mines, press the switch button again.
The alarm lamp will go out or the heater will be switched off.
If it is necessary for you, that the heater continued to work after 11 mines, press the inclusion button again, and the heater will work 11 more minutes.
Having pressed the button of inclusion of a heater of back glass, it is possible to remove also a fog from external rear-view mirrors.
Prevention
When cleaning an internal rear-view mirror use a soft fabric and clear, not strongly pressing on glass.
Do not paste stickers, a sticky tape and anything else that fastens to glass by means of glue.
Do not include a heater of back glass at start of the engine or when the engine is switched off.
Switch off a heater as soon as possible after glass will be cleared not to discharge the accumulator.
|