Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
- 6. Power supply system
   6.1. Introduction
   6.2. Air removal from a power supply system
   6.3. Water removal from the fuel filter
   6.4. Replacement of a filtering element of the fuel filter
   6.5. Removal and TNVD installation
   6.6. Idling adjustment
   6.7. Check of system of prestarting heating of the engine 4D56Т
   6.8. Control unit check by prestarting heating
   6.9. Check of the relay of inclusion of starting candles
   6.10. Removal and turbokompressor installation
   6.11. Check of pressure of pressurization
   6.12. Vozdukho-vozdushny cooler
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes




6.4. Replacement of a filtering element of the fuel filter

GENERAL INFORMATION

Fuel filter

 
1. The pipeline of removal of fuel in a tank
2. Pipeline of a supply of fuel
3. A filtering element
4. Arm
5. Manual toplivopodkachivayushchiya
pump
6. Blowing-off screw
7. The sensor of availability of water in fuel

PERFORMANCE ORDER
1. Separate the socket of the sensor of availability of water in fuel.
2. Turn on and remove the sensor of availability of water in fuel.
3. A wrench turn on and remove filtering element.
4. Slightly grease with fuel laying of a new filtering element.
5. Put on a place and wrap by hand a new filtering element.
6. Establish the sensor of availability of water in fuel and connect to it a block.
7. Pump over a power supply system.