Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
- 13. Electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Tension check
   13.3. Detection of short circuit
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. Finding of not closed chain
   13.7. Safety locks
   13.8. Burned-through crossing points
   13.9. Automatic switches
   13.10. System of safety of SRS (safety cushion)
   + 13.11. Heater
   - 13.12. Conditioner
      13.12.1. Compressor
      13.12.2. Condenser
      13.12.3. Condenser fan
      13.12.4. Auxiliary condenser and fan
      - 13.12.5. Evaporator
         13.12.5.1. Back evaporator
      13.12.6. Conditioner switch
      13.12.7. Conditioner control unit
      13.12.8. Broad valve
      13.12.9. Conditioner highway
      13.12.10. Ring sealant of tubes of a coolant
   + 13.13. Cruise control
   + 13.14. Audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Lighting devices
   + 13.18. Protection devices of electric chains
+ 14. Electroschemes






13.12.5.1. Back evaporator

GENERAL INFORMATION

Details of the back evaporator (1983-91)

1. The line with a liquid coolant

2. Union

3. Ring

4. Air line

5. Socket

6. Evaporator

System of air lines of the back conditioner

1. Ventilating nozzle
2. The holder In
3. Slip
4–8. Air lines

On a part of cars of 1983-91 2-step central air which includes the block of conditioning of a back part of salon is provided.

Removal and installation

PERFORMANCE ORDER
1. Depressurize the coolant highway in car-care center.
2. Disconnect the battery from weight.
3. Turn on the union of tubes on a partition of a motor compartment.
4. Remove an overlay of a back rack of a body on the right side under which there is an evaporator.
5. Turn on on the evaporator of the union of tubes and disconnect the top air line.
6. Disconnect the socket, unscrew bolts and carefully remove the evaporator.
7. Installation is carried out upside-down.
8. Replace sealing rings of unions, having greased them with compressor DENSO OIL or SUNISCO 5GS oil.