Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
- 13. Electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Tension check
   13.3. Detection of short circuit
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. Finding of not closed chain
   13.7. Safety locks
   13.8. Burned-through crossing points
   13.9. Automatic switches
   13.10. System of safety of SRS (safety cushion)
   + 13.11. Heater
   - 13.12. Conditioner
      13.12.1. Compressor
      13.12.2. Condenser
      13.12.3. Condenser fan
      13.12.4. Auxiliary condenser and fan
      + 13.12.5. Evaporator
      13.12.6. Conditioner switch
      13.12.7. Conditioner control unit
      13.12.8. Broad valve
      13.12.9. Conditioner highway
      13.12.10. Ring sealant of tubes of a coolant
   + 13.13. Cruise control
   + 13.14. Audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Lighting devices
   + 13.18. Protection devices of electric chains
+ 14. Electroschemes






13.12. Conditioner

13.12.1. Compressor
GENERAL INFORMATION

Compressor fastening on engines G63 (1), G55 (2), D55 (3)

Conditioner compressor (6-cylinder engines)
1. Belt
2. Union of hoses
3. Sealing rings
4. Compressor 		5. Arm
6. Pulley nut
7. Roller of a natyazhitel

Types of connections of branch pipes on the condenser

 1. Flange

2. Tube

3. Nut

4. Union

5. Ring

The highway of the 1-step conditioner of cars with l engines 2,6 and 3,0 (12-klapanny)
1. Absorption line
2. The line with a liquid coolant
 3. Forcing line

The highway of the 2-step conditioner of cars with engines 2,6 and 12-klapanny 3,0 l
1. Absorption line
2. The line with a liquid coolant
 3. Forcing line

The highway of the 2-step conditioner of cars with engines 3,5 and 24-klapanny 3,0 l
1. Arm of the lock of a cowl
2. Rack
3. Bolt of a cooler of transmission liquid
4. Bolt of an oil radiator
5. Arm of an oil radiator
6, 13. Arm
7. Bolt of fastening of the condenser
 8. Tube of a high pressure
9. Receiver arm /
moisture separator
10. Receiver
11. Fan
12. Hose of a high pressure
14. Condenser
15, 16, 17. Consolidation

Removal and installation

PERFORMANCE ORDER
1. Depressurize the coolant highway in car-care center.
2. Disconnect the battery from weight.
4-cylinder engines
3. Uncover the ignition distributor (2,0 l) or the coil (2,6 l) and take aside.
4. Remove a drive belt.
5. Disconnect from the wire compressor.
6. Disconnect from the compressor hoses, immediately muffle openings.
7. Unscrew the top bolts of the compressor, having paid attention to their arrangement.
8. Holding the compressor, unscrew the bottom bolt and remove the compressor.
9. Installation is carried out upside-down.
10. Bolts of the compressor wrap as their former installation.
11. Replace sealing rings of hoses.
6-cylinder engines
12. Remove a radiator casing.
13. Remove a drive belt.
14. Disconnect from the wire compressor.
15. Disconnect from the wire compressor.
16. Disconnect from the compressor hoses, immediately muffle openings.
17. Unscrew the top bolts of the compressor, having paid attention to their arrangement.
18. Holding the compressor, unscrew the bottom bolt and remove the compressor.
19. Installation is carried out upside-down.
20. Bolts of the compressor wrap as their former installation.
21. Replace sealing rings of hoses.