Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
- 13. Electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Tension check
   13.3. Detection of short circuit
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. Finding of not closed chain
   13.7. Safety locks
   13.8. Burned-through crossing points
   13.9. Automatic switches
   13.10. System of safety of SRS (safety cushion)
   + 13.11. Heater
   + 13.12. Conditioner
   + 13.13. Cruise control
   + 13.14. Audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Lighting devices
   + 13.18. Protection devices of electric chains
+ 14. Electroschemes






13.2. Tension check

GENERAL INFORMATION

Check of tension is necessary for carrying out, if the electric chain is faulty.

PERFORMANCE ORDER
1. Connect one of щупов a control bulb to the negative plug of the accumulator or mass of the car.
2. Connect the second щуп to connection in a checked chain, it is desirable located as it is possible closer to the accumulator or a safety lock.
3. If the control bulb lights up, tension is present: it means that the part of a chain between connection and the accumulator is serviceable.
4. Continue check of other part of a chain in the same way.
5. When you will find a point where tension is absent, it means that the source of malfunction lies between this point and the last point where tension was present.
6. The majority of problems is caused by bad connection.

Prevention

Do not forget that tension is present at some chains only if to turn a key in the ignition lock in a certain situation.