Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
- 9. Running gear
   + 9.1. Mechanical transmission
   - 9.2. Coupling
      9.2.1. Coupling adjustment
      9.2.2. Coupling pedal
      9.2.3. Details of a hummock drive of switching off of coupling
      9.2.4. Coupling with a hydraulic actuator
      9.2.5. Removal and coupling installation
      9.2.6. Main cylinder of coupling
      9.2.7. Working cylinder of switching off of coupling
      9.2.8. Air removal from a coupling hydraulic actuator
   + 9.3. Automatic transmission
   + 9.4. Zadny Bridge
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






9.2.7. Working cylinder of switching off of coupling

Removal and installation

PERFORMANCE ORDER
1. Lift the car.
2. Release the union for pumping and merge liquid in the substituted vessel.
3. Disconnect the hose union, unscrew 2 bolts and remove the working cylinder.
4. Installation is carried out upside-down.
5. Replace laying of the union and tighten an union bolt with the moment of 20-25 N of m, fastening bolts – 31–42 N of m.
6. Remove air from a hydraulic actuator.

Dismantling and assembly

PERFORMANCE ORDER
1. Get from a hydraulic actuator opening the valve and a spring.
2. Remove a pusher and cuffs.
3. To Vytolknita the piston the compressed air, having accepted precautionary measures.
4. Check a condition of a surface of the cylinder, existence of corrosion and scratches, check a condition of a sealant of the piston.
5. Worn-out details replace.
6. At assembly grease the piston and the cylinder with brake liquid.
7. Tighten bolts of fastening of the cylinder with the moment of 35 N of m, a bolt of the cap union – with the moment of 22 N of m, tighten the union for air removal with the moment of 8 N of m.
8. Grease a persistent surface of a pusher.
9. Remove air from a hydraulic actuator.