Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
- 9. Running gear
   + 9.1. Mechanical transmission
   + 9.2. Coupling
   - 9.3. Automatic transmission
      9.3.1. Adjustments
      + 9.3.2. The blocking switch
      9.3.3. Check of adjustment of a cable of management by transmission
      9.3.4. Mechanism of management of transmission
      9.3.5. Epiploon of a shaft of a case of transmission
      9.3.6. Removal and transmission installation
      9.3.7. Transfer case
      9.3.8. Forward and back epiploons
      + 9.3.9. Forward driveshaft and crosspieces
      + 9.3.10. Back driveshaft and crosspieces
      9.3.11. Forward leading axis
      9.3.12. A nave with a manual unblocking
      9.3.13. A nave with an automatic unblocking
      9.3.14. Forward semi-axes and epiploons of a forward axis
      9.3.15. Reducer of a forward axis
      9.3.16. Dismantling of CV JOINTS
   + 9.4. Zadny Bridge
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes

9.3. Automatic transmission

GENERAL INFORMATION

Transmission МА904А (1983-86)

1. Hydrotransformer
2. Case
3. Forward coupling
4. Tape of inclusion of a kick-down-mode
5. Back coupling
6. Leading casing
7. Forward planetary reducer
8. Back planetary reducer
9. Backing tape
10. Obgonny coupling
11. Centrifugal regulator
12. Bearing

13. Secondary shaft
14. Epiploon
15. Crankshaft
16. Gear wreath (a leading disk)
17. Primary shaft
18. Pump
19. Pallet
20. Filter
21. Block of valves
22. Parking gear wheel
23. Shaft
24. Plug

Transmission КМ148

1. Hydrotransformer
2. Pump
3. Coupling of the 4th transfer
4. Brake of the 4th transfer
5. Planetary reducer
6, 7. Coupling
8, 9, 10. Brakes
11. Forward planetary reducer
12. Back planetary reducer
13. Brake piston
14. Regulator

15. Selector
16. Entrance gear wheel
17. The coupling of a lowering gear wheel
18. A lowering gear wheel
19. Coupling of inclusion of a forward axis
20. Leading asterisk
21. Chain
22. Secondary shaft
23. Leading shaft of a transfer case
24. Intermediate gear wheel
25. Block of valves

V4AW2 (3) transmission

1. The blocking coupling
2. Hydrotransformer
3. Pump
4. Coupling of the 4th transfer
5. Brake of the 4th transfer
6. Planetary reducer of the 4th transfer
7, 8. Coupling
9, 10, 11. Brakes
12. Forward planetary reducer
13. Back planetary reducer
14. Brake piston
15. Regulator
16. Selector
17. Entrance gear wheel
18. The coupling of a lowering gear wheel
19. A nave of a lowering gear wheel

20. A lowering gear wheel
21. A blocked nave of interaxal differential
22. Synchronizer coupling
23. Nave of the synchronizer of inclusion of a forward axis
24. Leading shaft
25. Leading asterisk
26. Chain
27. Interaxal differential
28. The hydrotransformer of the blocked interaxal differential
29. Leading shaft
30. Leading shaft of a transfer case
31. Intermediate gear wheel
32. Block of valves

The hydrotransformer established on automatic transmissions

1. Forward casing

2. Turbine

3. Pump wheel

4. Stator

5. Obgonny coupling

Plate arrangement

The plate with the instruction such as transmission is strengthened on a partition of a motor compartment.

Typical interpretation of data of the plate

From left to right: year of release, month, type, control number for verification and serial number.

Cars of early releases were completed with transmission МА904А of Chrysler Torqueflite firm. The structure of transmission includes the hydrotransformer and 3-step system of change of transfers with 2 multidisk couplings, obgonny couplings and the planetary reducers, united in a uniform case. The hydraulic system consists of the pump and the block of valves.

Transmissions of other types – 4-step, with the shesterenchaty pump, with 3 multidisk couplings, 3 obgonny couplings, 4 multidisk brakes and 2 planetary reducers. The transfer number of the 4th transfer 0,668:1, this transfer is used as the highest at too big turns of the engine.

On transmissions КМ148 and V4AW2 (3) устнавливается a transfer case with continuous gearing of teeths of gear wheels. A box переключаетмся in situation 2WD/4WD (the forward axis) and is disconnected or joins in the situation HIGH/LOW (inclusion or demultiplikator shutdown on 4 driving wheels).

In the plate for transmissions of V4AW2 (3) strengthened on a partition of a motor compartment, the type of a tranmissiya and transfer numbers (the last 4 numbers) are specified.

It is recommended to fill transmission with Mopar ATF Plus Type 7176 liquid or
Dexron II.

Type of transmission with which the car is completed

Year of release	Engine displacement, l	Check point type	Wheel formula
1983-86	2,6	МА904А	4 x 2
1987-88	2,6	КМ148	4 x 4
1989	2,6 and 3,0	КМ148, V4AW2	4 x 4
1990-93	3,0	V4AW2/V4AW3	4 x 4
1994-98	3,0 and 3,5	V4AW3	4 x 4