Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
- 8. Fuel system
   + 8.1. Carburetor engines
   - 8.2. Engines with fuel injection
      8.2.1. Decompression of fuel system
      8.2.2. Fuel pump
      8.2.3. Throttle branch pipe
      8.2.4. Adjustment of a cable of an accelerator
      8.2.5. Nozzles
      8.2.6. Pressure regulator
      8.2.7. Reduktsionny valve of a tank
      8.2.8. Fuel filter
   + 8.3. Diesel engines
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






8.2.6. Pressure regulator

 ENGINES OF 2,4 L

Removal   

PERFORMANCE ORDER
1. Execute a decompression and disconnect the battery from weight.
2. Merge liquid.
3. Remove a throttle branch pipe (see subsection 8.2.3).
4. Disconnect from a regulator hoses, unscrew a bolt of fastening and remove a pressure regulator from the fuel distributor.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down taking into account the following.
2. Replace all laying (sealing rings).
3. Tighten bolts and nuts.

ENGINES 3,0 AND 3,5 L

Removal and installation

PERFORMANCE ORDER
1. Execute a decompression and disconnect the battery from weight.
2. Merge liquid.
3. Remove an inlet collector.
4. Remove a regulator of pressure and disconnect hoses.
5. Installation is carried out upside-down. Replace a ring of a regulator and tighten bolts with the moment of 9 N of m.