Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Mitsubisi Padzhero
+ 1.1. Dashboard and control units
- 2. Maintenance
   2.1. Periodicity of service
   2.2. Refueling capacities
   2.3. Filter replacement
   2.4. Fuel filter
   2.5. Zolotnik of ventilation of a case (petrol engines)
   2.6. Care of the battery
   2.7. Drive belts
   2.8. Hoses of system of cooling
   2.9. Covers of CV JOINTS
   2.10. Conditioner service
   2.11. Screen wiper brushes
   2.12. Wheels and tires
   2.13. Recommended fuel, liquids and lubricants
   + 2.14. Engine
   - 2.15. Cooling liquid
      2.15.1. Level check
      2.15.2. Replacement of cooling liquid
      2.15.3. Check of level of liquid of a hydraulic actuator of brakes and coupling
      2.15.4. Nutritious tank of the power steering
      2.15.5. Reducer of the steering mechanism
      2.15.6. Greasing of a running gear
      + 2.15.7. Body greasing
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes

2.15.2. Replacement of cooling liquid


Liquid is replaced on the warm engine.

1. Open a drain tap (or unscrew a stopper) in a ground part of a radiator.
2. When the stream of liquid will weaken, unscrew a radiator stopper.
3. Wrap jams and fill system of cooling with pure water. Start the engine and warm up the engine before thermostat opening. Add water to mouth top. Stop the engine. Merge water. Repeat procedure until then pure water will not pour down yet.
4. Wrap jams on hermetic. Fill in at first antifreeze, and then water in the necessary proportion (it is possible to fill in and a water and antifreeze mix). Warm up the engine and add a water and antifreeze mix to the necessary level. Close a radiator a stopper.


On engines 3,0л and 3,5 l before filling of antifreeze open a ventilating opening about which there is a warning plate.