Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
- 4. Cooling system
   4.1. Introduction
   4.2. Electrofan
   4.3. Replacement of cooling liquid
   4.4. Water pump
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes

4.4. Water pump


1. Disconnect a mass wire from the storage battery.
2. Merge cooling liquid.
3. Remove directing casing of the fan.
4. Remove bringing hose of a radiator.
5. Remove a belt of a drive of the pump of the hydraulic booster of a steering and a belt of a drive of the generator.
6. Remove the fan and the vyazkostny coupling.
7. Remove a pulley of the water pump.
8. Remove taking-away hose of a radiator.
9. Remove the bottom and top covers of a drive of the gas-distributing mechanism.
10. Remove belts of a drive of distributive and counterbalancing shaft.
11. Remove the pump of the hydraulic booster of a steering and its arm.
12. Remove the case of the thermostat and the thermostat.
13. Remove the water pump.

Check of a technical condition

1. Clear and check a condition of privalochny surfaces of the water pump and the block of cylinders.
2. Replace laying of the thermostat, the water pump and a pump epiploon, and also collars of hoses.
3. Check, whether there are no podtekaniye from the vyazkostny coupling.
4. Check a condition of a belt of a drive of the generator.


1. Installation of the water pump is made as it should be, the return to removal.
2. After installation of the water pump adjust a tension of a belt of a drive of the generator.


For simplification of installation of an epiploon moisten it with water. It is forbidden to apply oil or greasing in these purposes.