Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
- 13. Electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Tension check
   13.3. Detection of short circuit
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. Finding of not closed chain
   13.7. Safety locks
   13.8. Burned-through crossing points
   13.9. Automatic switches
   13.10. System of safety of SRS (safety cushion)
   + 13.11. Heater
   + 13.12. Conditioner
   + 13.13. Cruise control
   + 13.14. Audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   - 13.17. Lighting devices
      13.17.1. Headlights
      13.17.2. Lamp replacement
      13.17.3. Adjustment of a beam of light of headlights
      13.17.4. Indexes and turn repeaters
      13.17.5. Lamp of an additional signal of braking (1992-98)
      13.17.6. Devices of internal lighting
      13.17.7. Lamp of illumination of registration plate
   + 13.18. Protection devices of electric chains
+ 14. Electroschemes






13.17.7. Lamp of illumination of registration plate

GENERAL INFORMATION

Details of a lamp of illumination of back registration plate

1. Plafond

2. Lamp

3. Laying

4. Casing

5. Plug

PERFORMANCE ORDER
1. Unscrew screws and remove a plafond.
2. Replace a lamp (the lamp gets from the holder).
3. To remove a lamp assembled execute the following.
4. Remove plafonds and lamps.
5. Remove laying.
6. Remove the internal panel of a door of a back compartment.
7. Disconnect the socket and unscrew nuts of fastening of a casing of a lamp (on models of 1992-98 in addition wring out latches).
8. Remove a casing with a plug.
9. Assembly is carried out upside-down.