Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Mitsubisi Padzhero
+ 1.1. Dashboard and control units
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
- 10. Suspension bracket and steering
   10.1. Wheels
   + 10.2. Forward suspension bracket
   + 10.3. Back suspension bracket
   - 10.4. Steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. Ignition lock
      10.4.4. Lock of blocking of a wheel
      10.4.5. Steering column
      10.4.6. Steering drafts
      10.4.7. Pendular lever
      10.4.8. Average steering draft
      10.4.9. Lateral steering drafts
      10.4.10. Steering mechanism
      10.4.11. Pump of the hydraulic booster
      10.4.12. Air removal from the power steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






10.4.4. Lock of blocking of a wheel
GENERAL INFORMATION

Removal of the lock of blocking of a wheel (1992-98)

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
Cars of 1983-91.
2. Remove both casings of a steering column, disconnect wires and take aside.
3. Remove the ignition lock (fir-trees it is provided by a design).
4. Nozhovochnym a cloth saw through flutes in srezny bolts and turn out bolts a screw-driver.
5. Remove the lock.
6. Installation is carried out upside-down.
7. At a tightening of bolts of the new lock continuously check its work as key rotation.
8. Bolts tighten at first by hand, and then a 6-faced key to an oblamyvaniye of heads of bolts.
Cars of 1992-98.
9. Remove the bottom facing of the forward panel of salon.
10. Remove both casings of a steering column.
11. Remove a ring of illumination of the lock.
12. Transfer the ignition key to situation ASS, press on a lateral pin and get a drum of the lock of blocking of a wheel.
13. Installation is carried out upside-down.