Mitsubishi Pajero

1982-1998 of release

GENERAL INFORMATION

Tank and pump of the hydraulic booster (1983-89)


Tank 1,2. Hoses 3. Tank Pump	1, 2, 4. Hoses 5. Belt 6. Pump 7, 8. Pump arms

Pump of the hydraulic booster (1990-98)

1. Pump cover
2. Belt
3, 4. Hoses
5. Ring
6. The socket of the sensor of pressure (except 12-klapanny engines of 3,0 l with MKPP)

7. Pump
8, 9. Pump arms
10. Drain
11. Arm of a natyazhitel
12. Roller of a natyazhitel

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight.
2. Remove a tank, disconnect the bottom hose and merge liquid.
3. If the pulley acts in film, release pulley bolts.
4. Release bolts of fastening of the pump and remove a belt.
5. On the 24-klapanny engine of 3,0 l and the engine of 3,5 l a belt remove, having released a bolt of a natyazhitel.
6. Turn the pump by hand and remove the liquid remains.
7. Disconnect from the pump hoses, turn out bolts and remove the pump.
8. Installation is carried out upside-down.
	9. At installation of a pressure head hose the groove should be definitely сориентирован.
10. Check a condition of tubes.
11. Tighten all connections with certain moments.
12. Fill in liquid and remove air from the hydraulic booster.