Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Mitsubisi Padzhero
+ 1.1. Dashboard and control units
- 2. Maintenance
   2.1. Periodicity of service
   2.2. Refueling capacities
   2.3. Filter replacement
   2.4. Fuel filter
   2.5. Zolotnik of ventilation of a case (petrol engines)
   2.6. Care of the battery
   2.7. Drive belts
   2.8. Hoses of system of cooling
   2.9. Covers of CV JOINTS
   2.10. Conditioner service
   2.11. Screen wiper brushes
   2.12. Wheels and tires
   2.13. Recommended fuel, liquids and lubricants
   - 2.14. Engine
      2.14.1. Check of level of oil in the engine
      2.14.2. Replacement of oil and oil filter
      2.14.3. Check of level of oil in a manual transmission
      2.14.4. Oil replacement in a manual transmission
      2.14.5. Liquid level in automatic transmission
      2.14.6. Liquid replacement in automatic transmission
      2.14.7. Oil replacement in a transfer case
      2.14.8. Reducers of the forward and back bridge
      2.14.9. Oil replacement in reducers
   + 2.15. Cooling liquid
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. Power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. Running gear
+ 10. Suspension bracket and steering
+ 11. Brake system
+ 12. Body
+ 13. Electric equipment
+ 14. Electroschemes






2.14.6. Liquid replacement in automatic transmission

GENERAL INFORMATION

Prevention

The drain stopper of transmission is provided only on a part of cars. The liquid replacement procedure in this case differs nothing from described below, behind that exception that instead of removal of the pallet it is necessary to unscrew a stopper.


Drain stopper of automatic transmission (on a part of cars)

1. Drain stopper


Marks for check of level of transmission liquid on щупе

1. The bottom mark for cold liquid
2. The top mark for cold liquid.
3. The bottom mark for hot liquid
4. The top mark for hot liquid

PERFORMANCE ORDER
1. Right after a trip the car also establish on supports. Establish the pallet under a transmission case.
2. Carefully remove the pallet, at first having partially unscrewed bolts and having slightly knocked, and then having finally turned out bolts. Merge liquid. Check a liquid condition. If liquid of black or dark brown color, or extends a "burned" smell, it is necessary to hand over the car in car-care center for transmission check.
3. Unscrew bolts of fastening and remove the filter. The porous filter replace. The mesh filter wash out in solvent and dry.
4. Establish the filter and carefully washed out pallet upside-down, having replaced laying. Tighten pallet bolts in diagonal sequence with the moment of 17 N of m.
5. Fill in in fresh liquid in necessary quantity to the bottom mark on щупе.
Liquid to pour it is not allowed.
6. Start the engine and transfer the selector lever from situation P to all other provisions, then again in R.Proverte's position level of transmission liquid. Add to the bottom mark. Make a trip, again check level and finish to the top mark corresponding to heated-up transmission.